Android

关注公众号 jb51net

关闭
首页 > 软件编程 > Android > android5.1 healthd读取电池节点信息

深入解析android5.1 healthd

作者：kc专栏

这篇文章主要为大家详细介绍了android5.1 healthd的相关资料，具有一定的参考价值，感兴趣的小伙伴们可以参考一下

healthd主要是读取电池节点的信息，传给BatteryService。或者在关机充电等使用。注意healthd中使用的是kernel的log。

下面先从main函数分析

int main(int argc, char **argv) { 
 int ch; 
 int ret; 
 
 klog_set_level(KLOG_LEVEL); 
 healthd_mode_ops = &android_ops; 
 
 if (!strcmp(basename(argv[0]), "charger")) {//解析输入参数如果是charger的使用charger_ops，这里就不做介绍 
  healthd_mode_ops = &charger_ops; 
 } else { 
  while ((ch = getopt(argc, argv, "cr")) != -1) {//分析输入命令,各个命令对应不同的charger_ops 
   switch (ch) { 
   case 'c': 
    healthd_mode_ops = &charger_ops; 
    break; 
   case 'r': 
    healthd_mode_ops = &recovery_ops; 
    break; 
   case '?': 
   default: 
    KLOG_ERROR(LOG_TAG, "Unrecognized healthd option: %c\n", 
       optopt); 
    exit(1); 
   } 
  } 
 } 
 
 ret = healthd_init();//healthd做初始化 
 if (ret) { 
  KLOG_ERROR("Initialization failed, exiting\n"); 
  exit(2); 
 } 
 
 healthd_mainloop();//主函数 
 KLOG_ERROR("Main loop terminated, exiting\n"); 
 return 3; 
}

如果是正常开机，不走关机充电等，healthd_mode_ops = &android_ops;而这里面具体的函数在后面进行详细的介绍。

static struct healthd_mode_ops android_ops = { 
 .init = healthd_mode_android_init, 
 .preparetowait = healthd_mode_android_preparetowait, 
 .heartbeat = healthd_mode_nop_heartbeat, 
 .battery_update = healthd_mode_android_battery_update, 
};

下面分析下healthd_init函数，heathd使用了epoll进行IO复用。

static int healthd_init() { 
 epollfd = epoll_create(MAX_EPOLL_EVENTS); 
 if (epollfd == -1) { 
  KLOG_ERROR(LOG_TAG, 
     "epoll_create failed; errno=%d\n", 
     errno); 
  return -1; 
 } 
 
 healthd_board_init(&healthd_config); 
 healthd_mode_ops->init(&healthd_config); 
 wakealarm_init(); 
 uevent_init(); 
 gBatteryMonitor = new BatteryMonitor(); 
 gBatteryMonitor->init(&healthd_config); 
 return 0; 
}

这里的healthd_mode_ops->init的函数是android_ops 的healthd_mode_android_init函数，这里主要是将binder通信的fd也加入epoll，而不像普通binder进程最后使用IPCThreadState::self()->joinThreadPool。这样所有的fd全在epoll管理，只用了一个线程

int healthd_mode_android_preparetowait(void) { 
 IPCThreadState::self()->flushCommands(); 
 return -1; 
} 
 
static void binder_event(uint32_t /*epevents*/) { 
 IPCThreadState::self()->handlePolledCommands(); 
} 
 
void healthd_mode_android_init(struct healthd_config* /*config*/) { 
 ProcessState::self()->setThreadPoolMaxThreadCount(0); 
 IPCThreadState::self()->disableBackgroundScheduling(true); 
 IPCThreadState::self()->setupPolling(&gBinderFd); 
 
 if (gBinderFd >= 0) { 
  if (healthd_register_event(gBinderFd, binder_event)) 
   KLOG_ERROR(LOG_TAG, 
      "Register for binder events failed\n"); 
 } 
 
 gBatteryPropertiesRegistrar = new BatteryPropertiesRegistrar(); 
 gBatteryPropertiesRegistrar->publish(); 
}

gBatteryPropertiesRegistrar->publish将"batteryproperties"这个Service加入到ServiceManager中

void BatteryPropertiesRegistrar::publish() { 
 defaultServiceManager()->addService(String16("batteryproperties"), this); 
}

接下来再来看下wakealarm_init

static void wakealarm_init(void) { 
 wakealarm_fd = timerfd_create(CLOCK_BOOTTIME_ALARM, TFD_NONBLOCK); 
 if (wakealarm_fd == -1) { 
  KLOG_ERROR(LOG_TAG, "wakealarm_init: timerfd_create failed\n"); 
  return; 
 } 
 
 if (healthd_register_event(wakealarm_fd, wakealarm_event)) 
  KLOG_ERROR(LOG_TAG, 
     "Registration of wakealarm event failed\n"); 
 
 wakealarm_set_interval(healthd_config.periodic_chores_interval_fast); 
}

wakealarm_init设置alarm唤醒的interval，再来看下时间处理函数

static void wakealarm_event(uint32_t /*epevents*/) { 
 unsigned long long wakeups; 
 
 if (read(wakealarm_fd, &wakeups, sizeof(wakeups)) == -1) {//出错结束 
  KLOG_ERROR(LOG_TAG, "wakealarm_event: read wakealarm fd failed\n"); 
  return; 
 } 
 KLOG_ERROR(LOG_TAG, "wakealarm_event\n"); 
 periodic_chores(); 
} 

static void periodic_chores() { 
 healthd_battery_update(); 
} 

void healthd_battery_update(void) { 
 // Fast wake interval when on charger (watch for overheat); 
 // slow wake interval when on battery (watch for drained battery). 
 KLOG_ERROR(LOG_TAG, "healthd_battery_update enter\n"); 
 int new_wake_interval = gBatteryMonitor->update() ?//调用主要的update函数，根据返回值，如果当前在充电返回true 
  healthd_config.periodic_chores_interval_fast ://时间设置1分钟 
   healthd_config.periodic_chores_interval_slow; 
 KLOG_ERROR(LOG_TAG, "healthd_battery_update after\n"); 
 if (new_wake_interval != wakealarm_wake_interval) 
   wakealarm_set_interval(new_wake_interval); 
 
 // During awake periods poll at fast rate. If wake alarm is set at fast 
 // rate then just use the alarm; if wake alarm is set at slow rate then 
 // poll at fast rate while awake and let alarm wake up at slow rate when 
 // asleep. 
 
 if (healthd_config.periodic_chores_interval_fast == -1) 
  awake_poll_interval = -1; 
 else 
  awake_poll_interval = 
   new_wake_interval == healthd_config.periodic_chores_interval_fast ?//当前时间是一分钟，epoll为永远阻塞，否则为1分钟 
    -1 : healthd_config.periodic_chores_interval_fast * 1000; 
}

接下来再来看看uEvent的，

static void uevent_init(void) { 
 uevent_fd = uevent_open_socket(64*1024, true); 
 
 if (uevent_fd < 0) { 
  KLOG_ERROR(LOG_TAG, "uevent_init: uevent_open_socket failed\n"); 
  return; 
 } 
  
 fcntl(uevent_fd, F_SETFL, O_NONBLOCK); 
 if (healthd_register_event(uevent_fd, uevent_event)) 
  KLOG_ERROR(LOG_TAG, 
     "register for uevent events failed\n"); 
}

看看uevent_event的处理函数,获取uevent后主要判断是否是电源系统的，如果是调用healthd_battery_update函数

static void uevent_event(uint32_t /*epevents*/) { 
 char msg[UEVENT_MSG_LEN+2]; 
 char *cp; 
 int n; 
 
 n = uevent_kernel_multicast_recv(uevent_fd, msg, UEVENT_MSG_LEN); 
 if (n <= 0) 
  return; 
 if (n >= UEVENT_MSG_LEN) /* overflow -- discard */ 
  return; 
 
 msg[n] = '\0'; 
 msg[n+1] = '\0'; 
 cp = msg; 
 KLOG_ERROR(LOG_TAG, "uevent_event\n"); 
 while (*cp) { 
  if (!strcmp(cp, "SUBSYSTEM=" POWER_SUPPLY_SUBSYSTEM)) {//是这个子系统的调用healthd_battery_update函数 
   healthd_battery_update(); 
   break; 
  } 
 
  /* advance to after the next \0 */ 
  while (*cp++) 
   ; 
 } 
}

下面分析下healthd_mainloop这个主函数，主函数主要是epoll函数监听3个fd，有事件就处理。

static void healthd_mainloop(void) { 
 while (1) { 
  struct epoll_event events[eventct]; 
  int nevents; 
  int timeout = awake_poll_interval; 
  int mode_timeout; 
 
  mode_timeout = healthd_mode_ops->preparetowait(); 
  if (timeout < 0 || (mode_timeout > 0 && mode_timeout < timeout)) 
   timeout = mode_timeout; 
  nevents = epoll_wait(epollfd, events, eventct, timeout);//epoll_wait等待各个fd的事件，timeout为超时时间 
  KLOG_ERROR(LOG_TAG, "kangchen healthd_mainloop epoll_wait\n"); 
  if (nevents == -1) { 
   if (errno == EINTR) 
    continue; 
   KLOG_ERROR(LOG_TAG, "healthd_mainloop: epoll_wait failed\n"); 
   break; 
  } 
 
  for (int n = 0; n < nevents; ++n) { 
   if (events[n].data.ptr)//遍历各个fd的事件上来，每个处理函数处理 
    (*(void (*)(int))events[n].data.ptr)(events[n].events); 
  } 
 
  if (!nevents)//当什么事件没有的时候，是因为epoll超时设置走下来的，这时候也要update下 
   periodic_chores(); 
 
  healthd_mode_ops->heartbeat(); 
 } 
 
 return; 
}

init函数主要将healthd_config 对象传入，并且将里面的成员的一些地址信息去初始化保存起来。主要是保存一些地址信息，以及充电方式。

void BatteryMonitor::init(struct healthd_config *hc) { 
 String8 path; 
 char pval[PROPERTY_VALUE_MAX]; 
 
 mHealthdConfig = hc;//将外面传进来的heathdconfig的指针赋给成员变量 
 DIR* dir = opendir(POWER_SUPPLY_SYSFS_PATH);//打开地址 /sys/class/power_supply 
 if (dir == NULL) { 
  KLOG_ERROR(LOG_TAG, "Could not open %s\n", POWER_SUPPLY_SYSFS_PATH); 
 } else { 
  struct dirent* entry; 
 
  while ((entry = readdir(dir))) { 
   const char* name = entry->d_name; 
 
   if (!strcmp(name, ".") || !strcmp(name, "..")) 
    continue; 
 
   char buf[20]; 
   // Look for "type" file in each subdirectory 
   path.clear(); 
   path.appendFormat("%s/%s/type", POWER_SUPPLY_SYSFS_PATH, name); 
   switch(readPowerSupplyType(path)) {//读取各个目录下type的值，比如/sys/class/power_supply/battery 下type的值为Battery，在readPowerSupplyType读取并且转化为ANDROID_POWER_SUPPLY_TYPE_BATTERY 
   case ANDROID_POWER_SUPPLY_TYPE_AC: 
    if (mHealthdConfig->acChargeHeathPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/health", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->acChargeHeathPath = path;//配置路径 
    } 
    path.clear(); 
    path.appendFormat("%s/%s/online", POWER_SUPPLY_SYSFS_PATH, name); 
    if (access(path.string(), R_OK) == 0) 
     mChargerNames.add(String8(name));//chargername 就是当前目录名字：ac 
    break; 
 
   case ANDROID_POWER_SUPPLY_TYPE_USB://usb 类似ac 
    if (mHealthdConfig->usbChargeHeathPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/health", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->usbChargeHeathPath = path; 
    } 
    path.clear(); 
    path.appendFormat("%s/%s/online", POWER_SUPPLY_SYSFS_PATH, name); 
    if (access(path.string(), R_OK) == 0) 
     mChargerNames.add(String8(name)); 
    break; 
 
   case ANDROID_POWER_SUPPLY_TYPE_WIRELESS://类似 
    path.clear(); 
    path.appendFormat("%s/%s/online", POWER_SUPPLY_SYSFS_PATH, name); 
    if (access(path.string(), R_OK) == 0) 
     mChargerNames.add(String8(name)); 
    break; 
 
   case ANDROID_POWER_SUPPLY_TYPE_BATTERY://battery 
    mBatteryDevicePresent = true; 
 
    if (mHealthdConfig->batteryStatusPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/status", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryStatusPath = path; 
    } 
 
    if (mHealthdConfig->batteryHealthPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/health", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryHealthPath = path; 
    } 
 
    if (mHealthdConfig->batteryPresentPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/present", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryPresentPath = path; 
    } 
 
    if (mHealthdConfig->batteryCapacityPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/capacity", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryCapacityPath = path; 
    } 
 
    if (mHealthdConfig->batteryVoltagePath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/voltage_now", 
          POWER_SUPPLY_SYSFS_PATH, name); 
     if (access(path, R_OK) == 0) { 
      mHealthdConfig->batteryVoltagePath = path; 
     } else { 
      path.clear(); 
      path.appendFormat("%s/%s/batt_vol", 
           POWER_SUPPLY_SYSFS_PATH, name); 
      if (access(path, R_OK) == 0) 
       mHealthdConfig->batteryVoltagePath = path; 
     } 
    } 
 
    if (mHealthdConfig->batteryCurrentNowPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/current_now", 
          POWER_SUPPLY_SYSFS_PATH, name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryCurrentNowPath = path; 
    } 
 
    if (mHealthdConfig->batteryCurrentAvgPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/current_avg", 
          POWER_SUPPLY_SYSFS_PATH, name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryCurrentAvgPath = path; 
    } 
 
    if (mHealthdConfig->batteryChargeCounterPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/charge_counter", 
          POWER_SUPPLY_SYSFS_PATH, name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryChargeCounterPath = path; 
    } 
 
    if (mHealthdConfig->batteryTemperaturePath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/temp", POWER_SUPPLY_SYSFS_PATH, 
          name); 
     if (access(path, R_OK) == 0) { 
      mHealthdConfig->batteryTemperaturePath = path; 
     } else { 
      path.clear(); 
      path.appendFormat("%s/%s/batt_temp", 
           POWER_SUPPLY_SYSFS_PATH, name); 
      if (access(path, R_OK) == 0) 
       mHealthdConfig->batteryTemperaturePath = path; 
     } 
    } 
 
    if (mHealthdConfig->batteryTechnologyPath.isEmpty()) { 
     path.clear(); 
     path.appendFormat("%s/%s/technology", 
          POWER_SUPPLY_SYSFS_PATH, name); 
     if (access(path, R_OK) == 0) 
      mHealthdConfig->batteryTechnologyPath = path; 
    } 
 
    break; 
 
   case ANDROID_POWER_SUPPLY_TYPE_UNKNOWN: 
    break; 
   } 
  } 
  closedir(dir); 
 } 
 
 if (!mChargerNames.size()) 
  KLOG_ERROR(LOG_TAG, "No charger supplies found\n"); 
 if (!mBatteryDevicePresent) {//主要由battery该成员变量就为true 
  KLOG_WARNING(LOG_TAG, "No battery devices found\n"); 
  hc->periodic_chores_interval_fast = -1; 
  hc->periodic_chores_interval_slow = -1; 
 } else { 
  if (mHealthdConfig->batteryStatusPath.isEmpty()) 
   KLOG_WARNING(LOG_TAG, "BatteryStatusPath not found\n"); 
。。。。。。。。。。。。。//这里都是一些警告 
 } 
 
 if (property_get("ro.boot.fake_battery", pval, NULL) > 0 
            && strtol(pval, NULL, 10) != 0) { 
  mBatteryFixedCapacity = FAKE_BATTERY_CAPACITY; 
  mBatteryFixedTemperature = FAKE_BATTERY_TEMPERATURE; 
 } 
}

下面就是update函数，将数据封装在BatteryProperties 中，并且通过healthd_mode_ops->battery_update把BatteryProperties 发给上层。

bool BatteryMonitor::update(void) { 
 bool logthis; 
 
 props.chargerAcOnline = false; 
 props.chargerUsbOnline = false; 
 props.chargerWirelessOnline = false; 
 props.batteryStatus = BATTERY_STATUS_UNKNOWN; 
 props.batteryHealth = BATTERY_HEALTH_UNKNOWN; 
//都是从之前配置的mHealthd中取地址，读取节点信息，保存到props成员变量中 
 if (!mHealthdConfig->batteryPresentPath.isEmpty()) 
  props.batteryPresent = getBooleanField(mHealthdConfig->batteryPresentPath); 
 else 
  props.batteryPresent = mBatteryDevicePresent; 
 
 props.batteryLevel = mBatteryFixedCapacity ? 
  mBatteryFixedCapacity : 
  getIntField(mHealthdConfig->batteryCapacityPath); 
 props.batteryVoltage = getIntField(mHealthdConfig->batteryVoltagePath) / 1000; 
 
 props.batteryTemperature = mBatteryFixedTemperature ? 
  mBatteryFixedTemperature : 
  getIntField(mHealthdConfig->batteryTemperaturePath); 
 
 const int SIZE = 128; 
 char buf[SIZE]; 
 String8 btech; 
 
 if (readFromFile(mHealthdConfig->batteryStatusPath, buf, SIZE) > 0) 
  props.batteryStatus = getBatteryStatus(buf); 
 
 if (readFromFile(mHealthdConfig->batteryHealthPath, buf, SIZE) > 0) 
  props.batteryHealth = getBatteryHealth(buf); 
 
 if (readFromFile(mHealthdConfig->batteryTechnologyPath, buf, SIZE) > 0) 
  props.batteryTechnology = String8(buf); 
 
 if (readFromFile(mHealthdConfig->acChargeHeathPath, buf, SIZE) > 0) 
  props.acChargeHeath= String8(buf); 
 
 if (readFromFile(mHealthdConfig->usbChargeHeathPath, buf, SIZE) > 0) 
  props.usbChargeHeath= String8(buf); 
 
 unsigned int i; 
 
 for (i = 0; i < mChargerNames.size(); i++) {//遍历之前保存的各个充电方式 
  String8 path; 
  path.appendFormat("%s/%s/online", POWER_SUPPLY_SYSFS_PATH, 
       mChargerNames[i].string());//路径就是每个目录下的online字段，比如/sys/class/power_supply/usb 下的online 
 
  if (readFromFile(path, buf, SIZE) > 0) { 
   if (buf[0] != '0') {//读取online里面的内容，如果当前在usb线上充电，那么usb下online里面的内容为1 
    path.clear(); 
    path.appendFormat("%s/%s/type", POWER_SUPPLY_SYSFS_PATH, 
         mChargerNames[i].string());//这里看看是哪个type的 
    switch(readPowerSupplyType(path)) { 
    case ANDROID_POWER_SUPPLY_TYPE_AC: 
     props.chargerAcOnline = true; 
     break; 
    case ANDROID_POWER_SUPPLY_TYPE_USB://将其值赋成true 
     props.chargerUsbOnline = true; 
     break; 
    case ANDROID_POWER_SUPPLY_TYPE_WIRELESS: 
     props.chargerWirelessOnline = true; 
     break; 
    default: 
     KLOG_WARNING(LOG_TAG, "%s: Unknown power supply type\n", 
         mChargerNames[i].string()); 
    } 
   } 
  } 
 } 
 
 logthis = !healthd_board_battery_update(&props); 
 
 if (logthis) { 
  char dmesgline[256]; 
 
  if (props.batteryPresent) { 
   snprintf(dmesgline, sizeof(dmesgline), 
     "battery l=%d v=%d t=%s%d.%d h=%d st=%d", 
     props.batteryLevel, props.batteryVoltage, 
     props.batteryTemperature < 0 ? "-" : "", 
     abs(props.batteryTemperature / 10), 
     abs(props.batteryTemperature % 10), props.batteryHealth, 
     props.batteryStatus); 
 
   if (!mHealthdConfig->batteryCurrentNowPath.isEmpty()) { 
    int c = getIntField(mHealthdConfig->batteryCurrentNowPath); 
    char b[20]; 
 
    snprintf(b, sizeof(b), " c=%d", c / 1000); 
    strlcat(dmesgline, b, sizeof(dmesgline)); 
   } 
  } else { 
   snprintf(dmesgline, sizeof(dmesgline), 
     "battery none"); 
  } 
 
  KLOG_WARNING(LOG_TAG, "%s chg=%s%s%s\n", dmesgline, 
      props.chargerAcOnline ? "a" : "", 
      props.chargerUsbOnline ? "u" : "", 
      props.chargerWirelessOnline ? "w" : ""); 
 } 
 
 healthd_mode_ops->battery_update(&props);//将数据传到上层的BatteryService 
 return props.chargerAcOnline | props.chargerUsbOnline |//返回当前是否属于充电 
   props.chargerWirelessOnline; 
}

接下来看看healthd_mode_ops->battery_update是怎么把数据传到上层的

void healthd_mode_android_battery_update( 
 struct android::BatteryProperties *props) { 
 if (gBatteryPropertiesRegistrar != NULL) 
  gBatteryPropertiesRegistrar->notifyListeners(*props); 
 
 return; 
}

上层会通过binder通信，注册一个回调到BatteryPropertiesRegistrar

void BatteryPropertiesRegistrar::registerListener(const sp<IBatteryPropertiesListener>& listener) { 
 { 
  if (listener == NULL) 
   return; 
  Mutex::Autolock _l(mRegistrationLock); 
  // check whether this is a duplicate 
  for (size_t i = 0; i < mListeners.size(); i++) { 
   if (mListeners[i]->asBinder() == listener->asBinder()) { 
    return; 
   } 
  } 
 
  mListeners.add(listener); 
  listener->asBinder()->linkToDeath(this); 
 } 
 healthd_battery_update(); 
}

而update函数就是调用了notifyListeners遍历各个listener传到上层BatteryService

void BatteryPropertiesRegistrar::notifyListeners(struct BatteryProperties props) { 
 Mutex::Autolock _l(mRegistrationLock); 
 for (size_t i = 0; i < mListeners.size(); i++) { 
  mListeners[i]->batteryPropertiesChanged(props); 
 } 
}

再来看看BatteryService中，在onStart中通过ServiceManager，和batteryproperties这个Service通信，将BatteryListener这个listenter注册到batteryproperties中去

@Override 
public void onStart() { 
 IBinder b = ServiceManager.getService("batteryproperties"); 
 final IBatteryPropertiesRegistrar batteryPropertiesRegistrar = 
   IBatteryPropertiesRegistrar.Stub.asInterface(b); 
 try { 
  batteryPropertiesRegistrar.registerListener(new BatteryListener()); 
 } catch (RemoteException e) { 
  // Should never happen. 
 } 
 
 publishBinderService("battery", new BinderService()); 
 publishLocalService(BatteryManagerInternal.class, new LocalService()); 
}

再来看看BatteryListener 的batteryPropertiesChanged接口，当下面调这个接口，就会调用BatteryService的update函数，然后就是BatteryService的一些主要流程就不分析了。

private final class BatteryListener extends IBatteryPropertiesListener.Stub { 
 @Override 
 public void batteryPropertiesChanged(BatteryProperties props) { 
  final long identity = Binder.clearCallingIdentity(); 
  try { 
   BatteryService.this.update(props); 
  } finally { 
   Binder.restoreCallingIdentity(identity); 
  } 
 } 
}

BatteryService接受healthd的数据都是被动的，healthd穿过来的。有没有主动去healthd查询的。

在BatteryManager中就有主动去healthd查询的，代码如下

private long queryProperty(int id) { 
 long ret; 
 
 if (mBatteryPropertiesRegistrar == null) { 
  IBinder b = ServiceManager.getService("batteryproperties");//获取batteryproperties Service 
  mBatteryPropertiesRegistrar = 
   IBatteryPropertiesRegistrar.Stub.asInterface(b);//接口转化下 
 
  if (mBatteryPropertiesRegistrar == null) 
   return Long.MIN_VALUE; 
 } 
 
 try { 
  BatteryProperty prop = new BatteryProperty(); 
 
  if (mBatteryPropertiesRegistrar.getProperty(id, prop) == 0)//prop是输出 
   ret = prop.getLong(); 
  else 
   ret = Long.MIN_VALUE; 
 } catch (RemoteException e) { 
  ret = Long.MIN_VALUE; 
 } 
 
 return ret; 
}

再到healthd看看对应的接口

status_t BatteryPropertiesRegistrar::getProperty(int id, struct BatteryProperty *val) { 
 return healthd_get_property(id, val); 
} 


status_t healthd_get_property(int id, struct BatteryProperty *val) { 
 return gBatteryMonitor->getProperty(id, val); 
}

java的BatteryProperty对象对应到这边是指针

status_t BatteryMonitor::getProperty(int id, struct BatteryProperty *val) { 
 status_t ret = BAD_VALUE; 
 
 val->valueInt64 = LONG_MIN; 
 
 switch(id) { 
 case BATTERY_PROP_CHARGE_COUNTER://根据不同ID，返回不同值 
  if (!mHealthdConfig->batteryChargeCounterPath.isEmpty()) { 
   val->valueInt64 = 
    getIntField(mHealthdConfig->batteryChargeCounterPath); 
   ret = NO_ERROR; 
  } else { 
   ret = NAME_NOT_FOUND; 
  } 
  break; 
 
 case BATTERY_PROP_CURRENT_NOW: 
  if (!mHealthdConfig->batteryCurrentNowPath.isEmpty()) { 
   val->valueInt64 = 
    getIntField(mHealthdConfig->batteryCurrentNowPath); 
   ret = NO_ERROR; 
  } else { 
   ret = NAME_NOT_FOUND; 
  } 
  break; 
 
 case BATTERY_PROP_CURRENT_AVG: 
  if (!mHealthdConfig->batteryCurrentAvgPath.isEmpty()) { 
   val->valueInt64 = 
    getIntField(mHealthdConfig->batteryCurrentAvgPath); 
   ret = NO_ERROR; 
  } else { 
   ret = NAME_NOT_FOUND; 
  } 
  break; 
 
 case BATTERY_PROP_CAPACITY: 
  if (!mHealthdConfig->batteryCapacityPath.isEmpty()) { 
   val->valueInt64 = 
    getIntField(mHealthdConfig->batteryCapacityPath); 
   ret = NO_ERROR; 
  } else { 
   ret = NAME_NOT_FOUND; 
  } 
  break; 
 
 case BATTERY_PROP_ENERGY_COUNTER: 
  if (mHealthdConfig->energyCounter) { 
   ret = mHealthdConfig->energyCounter(&val->valueInt64); 
  } else { 
   ret = NAME_NOT_FOUND; 
  } 
  break; 
 
 default: 
  break; 
 } 
 
 return ret; 
}

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持脚本之家。

您可能感兴趣的文章:
阅读全文