windows XP系统Stop c0000218 unknown hard error 蓝屏故障的解决方法

微软官方对此的故障分析及解决方案如下：

Stop 0xc0000218 error message means that a necessary registry hive file could not be loaded. This error message can occur if the file is corrupt or missing. To resolve this issue, you can reinstall the operating system and restore the registry files from a backup. The registry files may have been corrupted because of hard disk corruption or some other hardware problem.

This error message can also occur if the driver has corrupted the registry data while loading into memory, or the memory where the registry is loading has a parity error. In the latter case, turn off the external cache and check the memory chips.

To resolve this issue, follow these steps:

Start your computer by running the Recovery Console, run the chkdsk /p command on the drive, and then restart your computer. Test to determine whether the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to step 2.

When Windows loads, press SPACE BAR when the "Load Last Known Good" message appears.

Complete a parallel installation, and restore the registry files from a tape backup. To do so:

Reinstall Windows in a separate folder.

Restore the damaged registry hive from backup. This procedure is specific to the backup application that you used to make a backup. Consult the documentation of your backup application or consult the vendor if you need assistance. Typically, this procedure requires you to restore a system state backup to an alternate location, and then copy the appropriate registry files to the %SYSTEMROOT%\System32\config folder of the damaged operating system.

If you do not have a tape backup, include the backup of network servers and production workstations.

NOTE: If Windows is stored on a FAT partition, you can restore the files by using another computer and by copying the registry hive files to the %SYSTEMROOT%\System32\Config subfolder.

微软官方的解决方案http://support.microsoft.com/?scid=kb;en-us;156640

根据微软的解释，发生c0000218 unknown hard error 蓝屏故障的主要原因是由于非法关机导致注册表写入错误。具体是是注册表的Software文件（C:\Windows\System32\Config \下）已经损坏，在备份Copy的时候，显示“循环冗余”检查错误。

解决方法是：

1.使用UltraISO+WinPeBoot.iso制作U盘启动盘。
2.Bios中设定USB-HDD优先启动。
3.使用上面的U盘启动，进入系统后在U盘中找到FINALDATA ，启动之。在目录中找到   C:\Windows\System32\Config下的Software和Software.log文件，分别选中这2个文件，在右键菜单中选择“恢 复”，另存一个位置；
4.将恢复后的Software和Software.log这2个文件拷贝到\Windows\System32\Config目录中；
5.退出U盘启动的PE，重新开机启动。
注：在进行上述操作前，曾运行了PE中的诺顿磁盘修复工具，这次的故障排除是否与该操作有关，尚待进一步验证。

重要结论：c0000218 unknown hard error 蓝屏故障看似是硬件故障，其实是XP启动时的注册文件的损坏，可以通过损坏文件的修复排除故障，而不需要重装系统。