Linux命令学习总结：详解reboot命令

[root@DB-Server ~]# reboot --help
usage: reboot [-n] [-w] [-d] [-f] [-h] [-i]
    -n: don't sync before halting the system
    -w: only write a wtmp reboot record and exit.
    -d: don't write a wtmp record.
    -f: force halt/reboot, don't call shutdown.
    -h: put harddisks in standby mode.
    -i: shut down all network interfaces.

[root@DB-Server ~]# man reboot
HALT(8)        Linux System Administrator鈥檚 Manual       HALT(8)
 
NAME
    halt, reboot, poweroff - stop the system.
 
SYNOPSIS
    /sbin/halt [-n] [-w] [-d] [-f] [-i] [-p] [-h]
    /sbin/reboot [-n] [-w] [-d] [-f] [-i]
    /sbin/poweroff [-n] [-w] [-d] [-f] [-i] [-h]
 
DESCRIPTION
    Halt notes that the system is being brought down in the file /var/log/wtmp, and then either tells the kernel to halt, reboot or poweroff the system.
 
    If halt or reboot is called when the system is not in runlevel 0 or 6, in other words when it鈥檚 running normally, shutdown will be invoked instead (with
    the -h or -r flag). For more info see the shutdown(8) manpage.
 
    The rest of this manpage describes the behaviour in runlevels 0 and 6, that is when the systems shutdown scripts are being run.
 
OPTIONS
    -n   Don鈥檛 sync before reboot or halt. Note that the kernel and storage drivers may still sync.
 
    -w   Don鈥檛 actually reboot or halt but only write the wtmp record (in the /var/log/wtmp file).
 
    -d   Don鈥檛 write the wtmp record. The -n flag implies -d.
 
    -f   Force halt or reboot, don鈥檛 call shutdown(8).
 
    -i   Shut down all network interfaces just before halt or reboot.
 
    -h   Put all harddrives on the system in standby mode just before halt or poweroff.
 
    -p   When halting the system, do a poweroff. This is the default when halt is called as poweroff.
 
DIAGNOSTICS
    If you鈥檙e not the superuser, you will get the message 鈥榤ust be superuser鈥? Users logged in locally on the console can call halt, reboot, and poweroff
    without supplying the root password, due to pam_console (8).
 
NOTES
    Under older sysvinit releases , reboot and halt should never be called directly. From release 2.74 on halt and reboot invoke shutdown(8) if the system is
    not in runlevel 0 or 6. This means that if halt or reboot cannot find out the current runlevel (for example, when /var/run/utmp hasn鈥檛 been initialized
    correctly) shutdown will be called, which might not be what you want. Use the -f flag if you want to do a hard halt or reboot.
 
    The -h flag puts all harddisks in standby mode just before halt or poweroff. Right now this is only implemented for IDE drives. A side effect of putting
    the drive in standby mode is that the write cache on the disk is flushed. This is important for IDE drives, since the kernel doesn鈥檛 flush the write-cache
    itself before poweroff.
 
    The halt program uses /proc/ide/hd* to find all IDE disk devices, which means that /proc needs to be mounted when halt or poweroff is called or the -h
    switch will do nothing.
 
AUTHOR
    Miquel van Smoorenburg, miquels@cistron.nl
 
SEE ALSO
    shutdown(8), init(8), pam_console(8)
 
                 Nov 6, 2001             HALT(8)
(END)

 [root@DB-Server ~]# reboot -f

[root@DB-Server ~]# reboot -i
 
Broadcast message from root (pts/1) (Mon Jul 28 11:31:28 2014):
 
The system is going down for reboot NOW!

[root@DB-Server ~]# reboot -n
 
Broadcast message from root (pts/1) (Mon Jul 28 11:33:57 2014):
 
The system is going down for reboot NOW!

[root@DB-Server ~]# reboot -d
 
Broadcast message from root (pts/2) (Mon Jul 28 11:23:26 2014):
 
The system is going down for reboot NOW!