Docker CentOS7的系统上安装部署以及基础教程
投稿：lqh
说明：
本文介绍如何在CentOS7的系统上安装部署Docker环境，本文参考Docker官方文档如下链接：
https://docs.docker.com/engine/installation/centos/
CentOS7的系统上安装部署Docker环境
1 CentOS7安装（略）
2 升级系统
yum update
升级完成后需要重启下系统。
3 添加docker yum源
执行如下命令：
cat >/etc/yum.repos.d/docker.repo name=Docker Repository baseurl=https://yum.dockerproject.org/repo/main/centos/7 enabled=1 gpgcheck=1 gpgkey=https://yum.dockerproject.org/gpg EOF
4 安装Docker软件包
yum install docker-engine
5 启动Docker服务
service docker start
6 测试运行下hello-world镜像
docker run hello-world
7 查看docker信息
使用docker info 命令可以参考系统、Docker的详细信息：
docker info Containers: 3 Images: 2 Server Version: 1.9.0 Storage Driver: devicemapper Pool Name: docker-253:0-202597120-pool Pool Blocksize: 65.54 kB Base Device Size: 107.4 GB Backing Filesystem: xfs Data file: /dev/loop2 Metadata file: /dev/loop3 Data Space Used: 1.824 GB Data Space Total: 107.4 GB Data Space Available: 47.87 GB Metadata Space Used: 1.655 MB Metadata Space Total: 2.147 GB Metadata Space Available: 2.146 GB Udev Sync Supported: true Deferred Removal Enabled: false Deferred Deletion Enabled: false Deferred Deleted Device Count: 0 Data loop file: /var/lib/docker/devicemapper/devicemapper/data Metadata loop file: /var/lib/docker/devicemapper/devicemapper/metadata Library Version: 1.02.93-RHEL7 (2015-01-28) Execution Driver: native-0.2 Logging Driver: json-file Kernel Version: 3.10.0-229.20.1.el7.x86_64 Operating System: CentOS Linux 7 (Core) CPUs: 24 Total Memory: 11.57 GiB Name: localhost.localdomain ID: VIAJ:MW46:FVFJ:QN7G:XI66:OUBO:M65B:KAUE:BIPC:LL5D:HBCL:762N
8 创建docker用户组，并将用户放到docker组内部
建议使用非root用户运行docker，因为root用户运行docker镜像非常不安全。
创建test1用户，并将用户加入到docker用户组：
[[email protected]~]# useradd test1
[[email protected]~]# usermod -aG docker test1
切到test1用户，运行docker镜像：
[[email protected]~]# su test1
[[email protected]]$
[[email protected]]$ docker run hello-world
9 设置dock服务开机启动
chkconfig docker on
10 卸载Docker
yum list installed | grep docker
yum -y remove docker-engine.x86_64
rm -rf /var/lib/docker
然后删除相关用户。
补充说明：
关于Docker的网络
和kvm类似，看起来也是使用网桥的方式：
[[email protected] ~]# ifconfig docker0: flags=4163 mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 0.0.0.0 inet6 fe80::42:84ff:fe7f:4510 prefixlen 64 scopeid 0x20 ether 02:42:84:7f:45:10 txqueuelen 0 (Ethernet) RX packets 12 bytes 840 (840.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3 bytes 258 (258.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 0 (Local Loopback) RX packets 20530318 bytes 1812359321 (1.6 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 20530318 bytes 1812359321 (1.6 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth9422d62: flags=4163 mtu 1500 inet6 fe80::6c36:d0ff:fef5:3996 prefixlen 64 scopeid 0x20 ether 6e:36:d0:f5:39:96 txqueuelen 0 (Ethernet) RX packets 8 bytes 648 (648.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 10 bytes 828 (828.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [[email protected] ~]# brctl show bridge name bridge id STP enabled interfaces docker0 8000.0242847f4510 no veth9422d62 [[email protected] ~]#
感谢阅读，希望能帮助到大家，谢谢对本站的支持！