spring boot多数据源动态切换代码实例
作者：炫舞风中
这篇文章主要介绍了spring boot多数据源动态切换代码实例,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下
这篇文章主要介绍了spring boot多数据源动态切换代码实例,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下
当项目中存在多数据源时，就涉及到数据源的动态切换，通过研究，特此记录一下。
1、maven依赖
<!--数据库连接-->
<dependency>
<groupId>com.oracle</groupId>
<artifactId>ojdbc6</artifactId>
<version>11.2.0.4</version>
<scope>runtime</scope>
</dependency>
<!--数据库连接池->
<dependency>
<groupId>com.alibaba</groupId>
<artifactId>druid-spring-boot-starter</artifactId>
<version>1.1.10</version>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-jdbc</artifactId>
</dependency>
<!--aop->
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-aop</artifactId>
</dependency>
2、多数据源信息配置
#多数据源测试
spring:
datasource:
druid:
master:
driver-class-name: oracle.jdbc.driver.OracleDriver
username: test
password: test
url: jdbc:oracle:thin:@//ip1:1521/orcl
slave:
driver-class-name: oracle.jdbc.driver.OracleDriver
username: test
password: test
url: jdbc:oracle:thin:@//ip2:1521/orcl
3、数据源配置信息转换成实体类
@ConfigurationProperties(prefix = "spring.datasource.druid")
@Data
@Component
public class DataSourceProperties {
private Map<String,String>master;
private Map<String,String>slave;
}
4、动态数据源切换类
public class DynamicDataSource extends AbstractRoutingDataSource {
private static final ThreadLocal<String> contextHolder = new ThreadLocal<>();
public DynamicDataSource(DataSource defaultTargetDataSource, Map<Object, Object> targetDataSources) {
super.setDefaultTargetDataSource(defaultTargetDataSource);
super.setTargetDataSources(targetDataSources);
super.afterPropertiesSet();
}
@Override
protected Object determineCurrentLookupKey() {
return getDataSource();
}
public static void setDataSource(String dataSource) {
contextHolder.set(dataSource);
}
public static String getDataSource() {
return contextHolder.get();
}
public static void clearDataSource() {
contextHolder.remove();
}
}
5、多数据源配置类
@Configuration
public class DynamicDataSourceConfig {
@Bean
public DataSource master(@Autowired DataSourceProperties dataSourceProperties){
DruidDataSource druidDataSource = new DruidDataSource();
Map<String, String> master = dataSourceProperties.getMaster();
druidDataSource.setUsername(master.get("username"));
druidDataSource.setPassword(master.get("password"));
druidDataSource.setUrl(master.get("url"));
//其他参数配置 省略
return druidDataSource;
}
@Bean
public DataSource slave(@Autowired DataSourceProperties dataSourceProperties){
DruidDataSource druidDataSource = new DruidDataSource();
Map<String, String> slave = dataSourceProperties.getSlave();
druidDataSource.setUsername(slave.get("username"));
druidDataSource.setPassword(slave.get("password"));
druidDataSource.setUrl(slave.get("url"));
//其他参数配置 省略
return druidDataSource;
}
@Bean
@Primary
public DynamicDataSource dataSource(DataSource master,DataSource slave){
Map<Object,Object>map = new HashMap<>(4);
map.put("master",master);
map.put("slave",slave);
return new DynamicDataSource(master,map);
}
}
6、自定义@DataSource注解
@Target(ElementType.METHOD)
@Retention(RetentionPolicy.RUNTIME)
public @interface DataSource {
String name() default "master";
}
7、Aop切面类配置
@Component
@Aspect
public class DataSourceAspect {
@Pointcut("@annotation(com.zxgeo.sso.muiltDatasource.anons.DataSource)")
public void dataSourcePointCut(){}
@Around(value = "dataSourcePointCut()")
public Object around(ProceedingJoinPoint point) throws Throwable {
MethodSignature signature = (MethodSignature) point.getSignature();
Method method = signature.getMethod();
DataSource dataSource = method.getAnnotation(DataSource.class);
if(dataSource == null){
DynamicDataSource.setDataSource("master");
}else {
DynamicDataSource.setDataSource(dataSource.name());
}
try {
return point.proceed();
} finally {
DynamicDataSource.clearDataSource();
}
}
}
8、启动配置注解信息，重要（不然运行会报错）
@SpringBootApplication(exclude= {DataSourceAutoConfiguration.class})
9、测试
（1）、service层（此处没有使用mybatis）
@Service
public class TestService {
@Autowired
private javax.sql.DataSource dataSource;
@DataSource
public Map<String,Object> getMasterDataSource() throws SQLException {
Connection connection = dataSource.getConnection();
Map<String,Object> map;
try (PreparedStatement preparedStatement
= connection.prepareStatement("SELECT * FROM AA WHERE A=10001")) {
ResultSet resultSet = preparedStatement.executeQuery();
map = new HashMap<>();
while (resultSet.next()){
map.put("A",resultSet.getString("A"));
map.put("B",resultSet.getString("B"));
map.put("C",resultSet.getString("C"));
}
}
return map;
}
@DataSource(name = "slave")
public Map<String,Object> getSlaveDataSource() throws SQLException {
Connection connection = dataSource.getConnection();
Map<String,Object> map;
try (PreparedStatement preparedStatement
= connection.prepareStatement("SELECT * FROM AA WHERE A=10002")) {
ResultSet resultSet = preparedStatement.executeQuery();
map = new HashMap<>();
while (resultSet.next()){
map.put("A",resultSet.getString("A"));
map.put("B",resultSet.getString("B"));
map.put("C",resultSet.getString("C"));
}
}
return map;
}
}
（2）、单元测试
@SpringBootTest
@RunWith(SpringRunner.class)
class SsoApplicationTests {
@Autowired
private TestService testService;
@Test
public void muliDatasorce() throws SQLException {
Map<String, Object> masterDataSourceUrl = testService.getMasterDataSource();
System.out.println(masterDataSourceUrl);
Map<String, Object> slaveDataSourceUrl = testService.getSlaveDataSource();
System.out.println(slaveDataSourceUrl);
}
}
（3）、结果：
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持脚本之家。