Python 使用指定的网卡发送HTTP请求的实例
作者：zhipeng-python
今天小编就为大家分享一篇Python 使用指定的网卡发送HTTP请求的实例，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧
需求: 一台机器上有多个网卡, 如何访问指定的 URL 时使用指定的网卡发送数据呢?
$ curl --interface eth0 www.baidu.com # curl interface 可以指定网卡
阅读 urllib.py 的源码, 追述到 open_http –> httplib.HTTP –> httplib.HTTP._connection_class = HTTPConnection
HTTPConnection 在创建的时候会指定一个 source_address.
HTTPConnection.connect 时调用 HTTPConnection._create_connection = socket.create_connection
# 先看一下本地网卡信息 $ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1<PERFORMNUD> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether c8:e0:eb:17:3a:73 inet6 fe80::cae0:ebff:fe17:3a73%en0 prefixlen 64 scopeid 0x4 inet 192.168.20.2 netmask 0xffffff00 broadcast 192.168.20.255 nd6 options=1<PERFORMNUD> media: autoselect status: active en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=4<VLAN_MTU> ether 0c:5b:8f:27:9a:64 inet6 fe80::e5b:8fff:fe27:9a64%en8 prefixlen 64 scopeid 0xa inet 192.168.8.100 netmask 0xffffff00 broadcast 192.168.8.255 nd6 options=1<PERFORMNUD> media: autoselect (100baseTX <full-duplex>) status: active
可以看到en0和en1, 这两块网卡都可以访问公网. lo0是本地回环.
直接修改 socket.py 做测试.
def create_connection(address, timeout=_GLOBAL_DEFAULT_TIMEOUT,
source_address=None):
"""If *source_address* is set it must be a tuple of (host, port)
for the socket to bind as a source address before making the connection.
An host of '' or port 0 tells the OS to use the default.
source_address 如果设置, 必须是传递元组 (host, port), 默认是 ("", 0)
"""
host, port = address
err = None
for res in getaddrinfo(host, port, 0, SOCK_STREAM):
af, socktype, proto, canonname, sa = res
sock = None
try:
sock = socket(af, socktype, proto)
# sock.bind(("192.168.20.2", 0)) # en0
# sock.bind(("192.168.8.100", 0)) # en1
# sock.bind(("127.0.0.1", 0)) # lo0
if timeout is not _GLOBAL_DEFAULT_TIMEOUT:
sock.settimeout(timeout)
if source_address:
print "socket bind source_address: %s" % source_address
sock.bind(source_address)
sock.connect(sa)
return sock
except error as _:
err = _
if sock is not None:
sock.close()
if err is not None:
raise err
else:
raise error("getaddrinfo returns an empty list")
参考说明文档, 直接分三次绑定不通网卡的 IP 地址, 端口设置为0.
# 测试 en0
$ python -c 'import urllib as u;print u.urlopen("http://ip.haschek.at").read()'
.148.245.16
# 测试 en1
$ python -c 'import urllib as u;print u.urlopen("http://ip.haschek.at").read()'
.94.115.227
# 测试 lo0
$ python -c 'import urllib as u;print u.urlopen("http://ip.haschek.at").read()'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 87, in urlopen
return opener.open(url)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 213, in open
return getattr(self, name)(url)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 350, in open_http
h.endheaders(data)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 1049, in endheaders
self._send_output(message_body)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 893, in _send_output
self.send(msg)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 855, in send
self.connect()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 832, in connect
self.timeout, self.source_address)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/socket.py", line 578, in create_connection
raise err
IOError: [Errno socket error] [Errno 49] Can't assign requested address
测试通过, 说明在多网卡情况下, 创建 socket 时绑定某块网卡的 IP 就可以, 端口需要设置为0. 如果端口不设置为0, 第二次请求时, 可以看到抛异常, 端口被占用.
Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 87, in urlopen return opener.open(url) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 213, in open return getattr(self, name)(url) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 350, in open_http h.endheaders(data) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 1049, in endheaders self._send_output(message_body) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 893, in _send_output self.send(msg) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 855, in send self.connect() File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 832, in connect self.timeout, self.source_address) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/socket.py", line 577, in create_connection raise err IOError: [Errno socket error] [Errno 48] Address already in use
如果是在项目中, 只需要把 socket.create_connection 这个函数的形参 source_address 设置为对应网卡的 (IP, 0) 就可以.
# test-interface_urllib.py
import socket
import urllib, urllib2
_create_socket = socket.create_connection
SOURCE_ADDRESS = ("127.0.0.1", 0)
#SOURCE_ADDRESS = ("172.28.153.121", 0)
#SOURCE_ADDRESS = ("172.16.30.41", 0)
def create_connection(*args, **kwargs):
in_args = False
if len(args) >=3:
args = list(args)
args[2] = SOURCE_ADDRESS
args = tuple(args)
in_args = True
if not in_args:
kwargs["source_address"] = SOURCE_ADDRESS
print "args", args
print "kwargs", str(kwargs)
return _create_socket(*args, **kwargs)
socket.create_connection = create_connection
print urllib.urlopen("http://ip.haschek.at").read()
通过测试, 可以发现已经可以通过制定的网卡发送数据, 并且 IP 地址对应网卡分配的 IP.
问题, 爬虫经常使用 requests, requests 是否支持呢. 通过测试, 可以发现, requests 并没有使用 python 内置的 socket 模块.
看源码, requests 是如果创建的 socket 连接呢. 方法和查看 urllib 创建socket 的方式一样. 具体就不写了.
因为我用的是 python 2.7, 所以可以定位到 requests 使用的 socket 模块是 urllib3.utils.connection 的.
修改方法和 urllib 相差不大.
import urllib3.connection _create_socket = urllib3.connection.connection.create_connection # pass urllib3.connection.connection.create_connection = create_connection # pass
运行后, 可能会抛出异常. requests.exceptions.ConnectionError: Max retries exceeded with .. Invalid argument
这个异常不是每次出现, 跟 IP 段有关系, 跳转递归层数太多导致, 只需要将 kwargs 中的 socket_options去掉即可. 127.0.0.1肯定会出异常.
import socket
import urllib
import urllib2
import urllib3.connection
import requests as req
_default_create_socket = socket.create_connection
_urllib3_create_socket = urllib3.connection.connection.create_connection
SOURCE_ADDRESS = ("127.0.0.1", 0)
#SOURCE_ADDRESS = ("172.28.153.121", 0)
#SOURCE_ADDRESS = ("172.16.30.41", 0)
def default_create_connection(*args, **kwargs):
try:
del kwargs["socket_options"]
except:
pass
in_args = False
if len(args) >=3:
args = list(args)
args[2] = SOURCE_ADDRESS
args = tuple(args)
in_args = True
if not in_args:
kwargs["source_address"] = SOURCE_ADDRESS
print "args", args
print "kwargs", str(kwargs)
return _default_create_socket(*args, **kwargs)
def urllib3_create_connection(*args, **kwargs):
in_args = False
if len(args) >=3:
args = list(args)
args[2] = SOURCE_ADDRESS
in_args = True
args = tuple(args)
if not in_args:
kwargs["source_address"] = SOURCE_ADDRESS
print "args", args
print "kwargs", str(kwargs)
return _urllib3_create_socket(*args, **kwargs)
socket.create_connection = default_create_connection
# 因为偶尔会出问题, 所以使用默认的 socket.create_connection
# urllib3.connection.connection.create_connection = urllib3_create_connection
urllib3.connection.connection.create_connection = default_create_connection
print " *** test requests: " + req.get("http://ip.haschek.at").content
print " *** test urllib: " + urllib.urlopen("http://ip.haschek.at").read()
print " *** test urllib2: " + urllib2.urlopen("http://ip.haschek.at").read()
注意: 使用 urllib3.utils.connection 好像不起作用
稍微再完善一下, 就是把根据网卡名自动获取 IP.
import subprocess
def get_all_net_devices():
sub = subprocess.Popen("ls /sys/class/net", shell=True, stdout=subprocess.PIPE)
sub.wait()
net_devices = sub.stdout.read().strip().splitlines()
# ['eth0', 'eth1', 'lo']
# 这里简单过滤一下网卡名字, 根据需求改动
net_devices = [i for i in net_devices if "ppp" in i]
return net_devices
ALL_DEVICES = get_all_net_devices()
def get_local_ip(device_name):
sub = subprocess.Popen("/sbin/ifconfig en0 | grep '%s ' | awk '{print $2}'" % device_name, shell=True, stdout=subprocess.PIPE)
sub.wait()
ip = sub.stdout.read().strip()
return ip
def random_local_ip():
return get_local_ip(random.choice(ALL_DEVICES))
# code ...
只需要把 args[2] = SOURCE_ADDRESS 和 kwargs["source_address"] = SOURCE_ADDRESS改成 random_local_ip() 或者 get_local_ip("eth0")
至于有什么用途, 就全凭想象了.
以上这篇Python 使用指定的网卡发送HTTP请求的实例就是小编分享给大家的全部内容了，希望能给大家一个参考，也希望大家多多支持脚本之家。