php技巧

关注公众号 jb51net

关闭
首页 > 网络编程 > PHP编程 > php技巧 > PHP连接及操作PostgreSQL数据库

PHP连接及操作PostgreSQL数据库的方法详解

作者：Lucky_wangtao

这篇文章主要介绍了PHP连接及操作PostgreSQL数据库的方法,结合实例形式分析了php针对PostgreSQL数据库的基本连接以及增删改查等相关操作技巧,需要的朋友可以参考下

本文实例讲述了PHP连接及操作PostgreSQL数据库的方法。分享给大家供大家参考，具体如下：

PostgreSQL扩展在默认情况下在最新版本的PHP 5.3.x中是启用的。 可以在编译时使用--without-pgsql来禁用它。仍然可以使用yum命令来安装PHP-PostgreSQL接口：

yum install php-pgsql

在开始使用PHP连接PostgreSQL接口之前，请先在PostgreSQL安装目录中找到pg_hba.conf文件，并添加以下行：

# IPv4 local connections:
host  all     all     127.0.0.1/32     md5

您可以启动/重新启动postgres服务器，使用以下命令运行：

[root@host]# service postgresql restart
Stopping postgresql service:                [ OK ]
Starting postgresql service:                [ OK ]

Windows用户必须启用php_pgsql.dll才能使用此扩展名。这个DLL包含在最新版本的PHP 5.3.x中的Windows发行版中。

PHP连接到PostgreSQL数据库

以下PHP代码显示如何连接到本地机器上的现有数据库，最后将返回数据库连接对象。

<?php
  $host    = "host=127.0.0.1";
  $port    = "port=5432";
  $dbname   = "dbname=testdb";
  $credentials = "user=postgres password=pass123";
  $db = pg_connect( "$host $port $dbname $credentials" );
  if(!$db){
   echo "Error : Unable to open database\n";
  } else {
   echo "Opened database successfully\n";
  }
?>

现在，让我们运行上面的程序打开数据库:testdb，如果成功打开数据库连接，那么它将给出以下消息：

Opened database successfully

创建表

以下PHP程序将用于在之前创建的数据库(testdb)中创建一个表：

<?php
  $host    = "host=127.0.0.1";
  $port    = "port=5432";
  $dbname   = "dbname=testdb";
  $credentials = "user=postgres password=pass123";
  $db = pg_connect( "$host $port $dbname $credentials" );
  if(!$db){
   echo "Error : Unable to open database\n";
  } else {
   echo "Opened database successfully\n";
  }
  $sql =<<<EOF
   CREATE TABLE COMPANY
   (ID INT PRIMARY KEY   NOT NULL,
   NAME      TEXT  NOT NULL,
   AGE      INT   NOT NULL,
   ADDRESS    CHAR(50),
   SALARY     REAL);
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
  } else {
   echo "Table created successfully\n";
  }
  pg_close($db);
?>

当执行上述程序时，它将在testdb数据库中创建COMPANY表，并显示以下消息：

Opened database successfully
Table created successfully

SQL

插入操作

以下PHP程序显示了如何在上述示例中创建的COMPANY表中创建记录：

<?php
  $host    = "host=127.0.0.1";
  $port    = "port=5432";
  $dbname   = "dbname=testdb";
  $credentials = "user=postgres password=pass123";
  $db = pg_connect( "$host $port $dbname $credentials" );
  if(!$db){
   echo "Error : Unable to open database\n";
  } else {
   echo "Opened database successfully\n";
  }
  $sql =<<<EOF
   INSERT INTO COMPANY (ID,NAME,AGE,ADDRESS,SALARY)
   VALUES (1, 'Paul', 32, 'California', 20000.00 );
   INSERT INTO COMPANY (ID,NAME,AGE,ADDRESS,SALARY)
   VALUES (2, 'Allen', 25, 'Texas', 15000.00 );
   INSERT INTO COMPANY (ID,NAME,AGE,ADDRESS,SALARY)
   VALUES (3, 'Teddy', 23, 'Norway', 20000.00 );
   INSERT INTO COMPANY (ID,NAME,AGE,ADDRESS,SALARY)
   VALUES (4, 'Mark', 25, 'Rich-Mond ', 65000.00 );
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
  } else {
   echo "Records created successfully\n";
  }
  pg_close($db);
?>

当执行上述程序时，它将在COMPANY表中创建给定的记录，并显示以下两行：

Opened database successfully
Records created successfully

SELECT操作

以下PHP程序显示了如何从上述示例中创建的COMPANY表中获取和显示记录：

<?php
  $host    = "host=127.0.0.1";
  $port    = "port=5432";
  $dbname   = "dbname=testdb";
  $credentials = "user=postgres password=pass123";
  $db = pg_connect( "$host $port $dbname $credentials" );
  if(!$db){
   echo "Error : Unable to open database\n";
  } else {
   echo "Opened database successfully\n";
  }
  $sql =<<<EOF
   SELECT * from COMPANY;
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
   exit;
  }
  while($row = pg_fetch_row($ret)){
   echo "ID = ". $row[0] . "\n";
   echo "NAME = ". $row[1] ."\n";
   echo "ADDRESS = ". $row[2] ."\n";
   echo "SALARY = ".$row[4] ."\n\n";
  }
  echo "Operation done successfully\n";
  pg_close($db);
?>

当执行上述程序时，将产生以下结果。 请记下，在创建表时按照它们使用的顺序返回字段。

Opened database successfully
ID = 1
NAME = Paul
ADDRESS = California
SALARY =  20000
ID = 2
NAME = Allen
ADDRESS = Texas
SALARY =  15000
ID = 3
NAME = Teddy
ADDRESS = Norway
SALARY =  20000
ID = 4
NAME = Mark
ADDRESS = Rich-Mond
SALARY =  65000
Operation done successfully

更新操作

以下PHP代码显示了如何使用UPDATE语句来更新指定记录，然后从COMPANY表中获取并显示更新的记录：

<?php
  $host    = "host=127.0.0.1";
  $port    = "port=5432";
  $dbname   = "dbname=testdb";
  $credentials = "user=postgres password=pass123";
  $db = pg_connect( "$host $port $dbname $credentials" );
  if(!$db){
   echo "Error : Unable to open database\n";
  } else {
   echo "Opened database successfully\n";
  }
  $sql =<<<EOF
   UPDATE COMPANY set SALARY = 25000.00 where ID=1;
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
   exit;
  } else {
   echo "Record updated successfully\n";
  }
  $sql =<<<EOF
   SELECT * from COMPANY;
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
   exit;
  }
  while($row = pg_fetch_row($ret)){
   echo "ID = ". $row[0] . "\n";
   echo "NAME = ". $row[1] ."\n";
   echo "ADDRESS = ". $row[2] ."\n";
   echo "SALARY = ".$row[4] ."\n\n";
  }
  echo "Operation done successfully\n";
  pg_close($db);
?>

执行上述程序时，会产生以下结果：

Opened database successfully
Record updated successfully
ID = 2
NAME = Allen
ADDRESS = 25
SALARY =  15000
ID = 3
NAME = Teddy
ADDRESS = 23
SALARY =  20000
ID = 4
NAME = Mark
ADDRESS = 25
SALARY =  65000
ID = 1
NAME = Paul
ADDRESS = 32
SALARY =  25000
Operation done successfully

删除操作

以下PHP代码显示了如何使用DELETE语句删除指定记录，然后从COMPANY表中获取并显示剩余的记录：

<?php
  $host    = "host=127.0.0.1";
  $port    = "port=5432";
  $dbname   = "dbname=testdb";
  $credentials = "user=postgres password=pass123";
  $db = pg_connect( "$host $port $dbname $credentials" );
  if(!$db){
   echo "Error : Unable to open database\n";
  } else {
   echo "Opened database successfully\n";
  }
  $sql =<<<EOF
   DELETE from COMPANY where ID=2;
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
   exit;
  } else {
   echo "Record deleted successfully\n";
  }
  $sql =<<<EOF
   SELECT * from COMPANY;
EOF;
  $ret = pg_query($db, $sql);
  if(!$ret){
   echo pg_last_error($db);
   exit;
  }
  while($row = pg_fetch_row($ret)){
   echo "ID = ". $row[0] . "\n";
   echo "NAME = ". $row[1] ."\n";
   echo "ADDRESS = ". $row[2] ."\n";
   echo "SALARY = ".$row[4] ."\n\n";
  }
  echo "Operation done successfully\n";
  pg_close($db);
?>

执行上述程序时，会产生以下结果：

Opened database successfully
Record deleted successfully
ID = 3
NAME = Teddy
ADDRESS = 23
SALARY =  20000
ID = 4
NAME = Mark
ADDRESS = 25
SALARY =  65000
ID = 1
NAME = Paul
ADDRESS = 32
SALARY =  25000
Operation done successfully

更多关于PHP相关内容感兴趣的读者可查看本站专题：《PHP基于pdo操作数据库技巧总结》、《php+Oracle数据库程序设计技巧总结》、《PHP+MongoDB数据库操作技巧大全》、《php面向对象程序设计入门教程》、《php字符串(string)用法总结》、《php+mysql数据库操作入门教程》及《php常见数据库操作技巧汇总》

希望本文所述对大家PHP程序设计有所帮助。

您可能感兴趣的文章:
阅读全文