apache 局域网访问配置方案

2008-07-02 23:00:33 作者：

linux下局域网访问配置文件，大家可以参考下，安全设置

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "g:/AppServ/Apache2.2" will be interpreted by the

# server as "g:/AppServ/Apache2.2/logs/foo.log".

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which Apache.exe is located

# will be used by default.  It is recommended that you always supply

# an explicit drive letter in absolute paths, however, to avoid

# confusion.

#

# prefork MPM

# StartServers: number of server processes to start

# MinSpareServers: minimum number of server processes which are kept spare

# MaxSpareServers: maximum number of server processes which are kept spare

# MaxClients: maximum number of server processes allowed to start

# MaxRequestsPerChild: maximum number of requests a server process serves

<IfModule mpm_prefork_module>

    StartServers          5

    MinSpareServers       5

    MaxSpareServers      10

    MaxClients          150

    MaxRequestsPerChild   0

</IfModule>

# ThreadsPerChild: constant number of worker threads in the server process

# MaxRequestsPerChild: maximum  number of requests a server process serves

#ThreadsPerChild 250

MaxRequestsPerChild  0

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to point the LockFile directive

# at a local disk.  If you wish to share the same ServerRoot for multiple

# httpd daemons, you will need to change at least LockFile and PidFile.

#

ServerRoot "g:/AppServ/Apache2.2"

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)

#

#Listen 192.168.1.4:80

Listen 80

#

# This configuration file reflects default settings for Apache HTTP Server.

#

# You may change these, but chances are that you may not need to.

#

#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300

#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On

#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100

#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 5

#

# UseCanonicalName: Determines how Apache constructs self-referencing

# URLs and the SERVER_NAME and SERVER_PORT variables.

# When set "Off", Apache will use the Hostname and Port supplied

# by the client.  When set "On", Apache will use the value of the

# ServerName directive.

#

UseCanonicalName Off

#

# AccessFileName: The name of the file to look for in each directory

# for additional configuration directives.  See also the AllowOverride

# directive.

#

AccessFileName .htaccess

#

# ServerTokens

# This directive configures what you return as the Server HTTP response

# Header. The default is 'Full' which sends information about the OS-Type

# and compiled in modules.

# Set to one of:  Full | OS | Minor | Minimal | Major | Prod

# where Full conveys the most information, and Prod the least.

#

ServerTokens Full

#

# Optionally add a line containing the server version and virtual host

# name to server-generated pages (internal error documents, FTP directory

# listings, mod_status and mod_info output etc., but not CGI generated

# documents or custom error documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.

# Set to one of:  On | Off | EMail

#

ServerSignature On

#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

#LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_default_module modules/mod_authn_default.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_default_module modules/mod_authz_default.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule autoindex_module modules/mod_autoindex.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule dav_module modules/mod_dav.so

#LoadModule dav_fs_module modules/mod_dav_fs.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

LoadModule env_module modules/mod_env.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule headers_module modules/mod_headers.so

LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

#LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

LoadModule log_config_module modules/mod_log_config.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

#LoadModule proxy_module modules/mod_proxy.so

#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

#LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_http_module modules/mod_proxy_http.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

LoadModule negotiation_module modules/mod_negotiation.so

#LoadModule rewrite_module modules/mod_rewrite.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule speling_module modules/mod_speling.so

#LoadModule status_module modules/mod_status.so

#LoadModule unique_id_module modules/mod_unique_id.so

LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule ssl_module modules/mod_ssl.so

LoadModule php5_module g:/AppServ\php5\php5apache2_2.dll

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin admin@jswkj.com

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

ServerName 192.168.1.4

#BindAddress 192.168.1.4

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "g:/AppServ/www"

#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# features.

#

<Directory />

    Options FollowSymLinks ExecCGI Indexes

    AllowOverride None

    Order deny,allow

    Deny from all

    Satisfy all

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "g:/AppServ/www">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options Indexes FollowSymLinks MultiViews ExecCGI

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride All

    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all



</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.php index.html index.htm

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<FilesMatch "^\.ht">

    Order allow,deny

    Deny from all

</FilesMatch>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog logs/error.log

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn



<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common



    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    CustomLog logs/access.log common

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    #CustomLog logs/access.log combined

</IfModule>



<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to

    # exist in your server's namespace, but do not anymore. The client

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://www.example.com/bar

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "g:/AppServ/www/cgi-bin/"



</IfModule>

#

# "g:/AppServ/www/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "g:/AppServ/www/cgi-bin">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>

#

# Apache parses all CGI scripts for the shebang line by default.

# This comment line, the first line of the script, consists of the symbols

# pound (#) and exclamation (!) followed by the path of the program that

# can execute this specific script.  For a perl script, with perl.exe in

# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the

# first line of the file.  Of course, CGI processing must be enabled by

# the appropriate ScriptAlias or Options ExecCGI directives for the files

# or directory in question.

#

# However, Apache on Windows allows either the Unix behavior above, or can

# use the Registry to match files by extention.  The command to execute

# a file of this type is retrieved from the registry by the same method as

# the Windows Explorer would use to handle double-clicking on a file.

# These script actions can be configured from the Windows Explorer View menu,

# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit

# button allows you to modify the Actions, of which Apache 1.3 attempts to

# perform the 'Open' Action, and failing that it will try the shebang line.

# This behavior is subject to change in Apache release 2.0.

#

# Each mechanism has it's own specific security weaknesses, from the means

# to run a program you didn't intend the website owner to invoke, and the

# best method is a matter of great debate.

#

# To enable the this Windows specific behavior (and therefore -disable- the

# equivilant Unix behavior), uncomment the following directive:

#

#ScriptInterpreterSource registry

#

# The directive above can be placed in individual <Directory> blocks or the

# .htaccess file, with either the 'registry' (Windows behavior) or 'script'

# (Unix behavior) option, and will override this server default option.

#

#

# DefaultType: the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain



<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig conf/mime.types

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):

    #AddHandler type-map var

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    #AddType text/html .shtml

    #AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

#MIMEMagicFile conf/magic

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

<IfModule mod_php5.c>

  AddType application/x-httpd-php .php

  AddType application/x-httpd-php .php3

  AddType application/x-httpd-php-source .phps

</IfModule>

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall is used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

#

#EnableMMAP off

#EnableSendfile off

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

#Include conf/extra/httpd-mpm.conf

# Multi-language error messages

#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

#Include conf/extra/httpd-autoindex.conf

# Language settings

#Include conf/extra/httpd-languages.conf

# User home directories

#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

#Include conf/extra/httpd-info.conf

# Virtual hosts

#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections

#Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>

#

# Directives controlling the display of server-generated directory listings.

#

# Required modules: mod_autoindex, mod_alias

#

# To see the listing of a directory, the Options directive for the

# directory must include "Indexes", and the directory must not contain

# a file matching those listed in the DirectoryIndex directive.

#

#

# IndexOptions: Controls the appearance of server-generated directory

# listings.

#

IndexOptions FancyIndexing HTMLTable VersionSort

# We include the /icons/ alias for FancyIndexed directory listings.  If

# you do not use FancyIndexing, you may comment this out.

#

Alias /icons/ "g:/AppServ/Apache2.2/icons/"



<Directory "g:/AppServ/Apache2.2/icons">

    Options Indexes MultiViews

    AllowOverride None

    Order allow,deny

    Allow from all

</Directory>

#

# AddIcon* directives tell the server which icon to show for different

# files or filename extensions.  These are only displayed for

# FancyIndexed directories.

#

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip



AddIconByType (TXT,/icons/text.gif) text/*

AddIconByType (IMG,/icons/image2.gif) image/*

AddIconByType (SND,/icons/sound2.gif) audio/*

AddIconByType (VID,/icons/movie.gif) video/*



AddIcon /icons/binary.gif .bin .exe

AddIcon /icons/binhex.gif .hqx

AddIcon /icons/tar.gif .tar

AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv

AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip

AddIcon /icons/a.gif .ps .ai .eps

AddIcon /icons/layout.gif .html .shtml .htm .pdf

AddIcon /icons/text.gif .txt

AddIcon /icons/c.gif .c

AddIcon /icons/p.gif .pl .py

AddIcon /icons/f.gif .for

AddIcon /icons/dvi.gif .dvi

AddIcon /icons/uuencoded.gif .uu

AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl

AddIcon /icons/tex.gif .tex

AddIcon /icons/bomb.gif core



AddIcon /icons/back.gif ..

AddIcon /icons/hand.right.gif README

AddIcon /icons/folder.gif ^^DIRECTORY^^

AddIcon /icons/blank.gif ^^BLANKICON^^

#

# DefaultIcon is which icon to show for files which do not have an icon

# explicitly set.

#

DefaultIcon /icons/unknown.gif

#

# AddDescription allows you to place a short description after a file in

# server-generated indexes.  These are only displayed for FancyIndexed

# directories.

# Format: AddDescription "description" filename

#

#AddDescription "GZIP compressed document" .gz

#AddDescription "tar archive" .tar

#AddDescription "GZIP compressed tar archive" .tgz

#

# ReadmeName is the name of the README file the server will look for by

# default, and append to directory listings.

#

# HeaderName is the name of a file which should be prepended to

# directory indexes.

ReadmeName README.html

HeaderName HEADER.html

#

# IndexIgnore is a set of filenames which directory indexing should ignore

# and not include in the listing.  Shell-style wildcarding is permitted.

#

IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

apache 局域网访问配置方案

您可能感兴趣的文章: